SURGICAL SCRUB SINKS
Full Size Scrub Sinks
MODELS
4101/SS-1
4102/SS-2
4103/SS-3
| Whitehall's
Full Size Scrub Sink fixtures are designed for durability and easy
accessibility. Available in either On-floor or Off-floor models,
these products are manufactured from heavy gage, Type 304, stainless
steel. Seamless welded construction minimizes the surface
areas where bacteria can collect. The sink is built with a sloping
bottom surface to control splashing. The unit is provided with a
gooseneck faucet and a sprayhead that can be removed for sterilization.
The water supply valve is activated by one push of a knee-operated
front panel and turned off by a second push. In addition, the scrub
sink can be completely hands-free with the sensor operated option. The cabinet itself has easily removable panels which allow for access to the valves - including the anti-scald mixing valve, the soap system, waste connections, stops and strainers. So, specify Whitehall. It's a superior sink. |
How to order Whitehall's Scrub-Sinks...
- Specify the model number from the list
below:
4101/SS1 - One-station surgical scrub sink, 32' wide.
4102/SS2 - Two-station surgical scrub sink, 63-1/2" wide.
4103/SS3 - Three-station surgical scrub sink, 94" wide.
- Specify the preferred mounting.**
MC - Mounting Carrier for Off-floor installation.
PB - Pedestal Base for On-floor installation.
- Select desired suffix options as described below.
Example: 1. SS1 2. MC 3. ETC-PDM
** Mounting
(-MC) A Mounting Carrier must be selected
if the Scrub-Sink is to be mounted off the floor. This facilitates cleaning
of the floor beneath the fixture, aiding in the creation of a sanitary
environment. The carrier provides the necessary support for the
fixture. This mounting would be appropriate for wall rough-in installations.
(-PB) A Pedestal Base should be specified
if the Scrub-Sink is an on-floor model. This sturdy base provides ample
support for the product, and would be appropriate for either wall or floor
rough-in installations.
Options
(-DTD) A Digital Time Display can
be added to the control panel of your Scrub-Sink. This LED display will
show both minutes and seconds of washing time elapsed to encourage proper
scrubbing techniques.
(-ETC) An extremely accurate
Electronic Timing Controller can be specified for your Scrub-Sink.
This valve controller has a two minute rinse warning indicator and can
be set for various time intervals, a short (user adjustable), a
long (10 minutes), and an abort cycle, to ensure thorough scrubbing.
(-LM) A Light Module which houses
a fluorescent light and diffuser can be specified to provide direct illumination
of the scrubbing bay.
(-PDM) A Metering Liquid Soap
Dispenser can also be specified. A reservoir is housed within the base
of the product and liquid soap is dispensed when a knee panel on the front
of the product is depressed.
(-SA) A Splash Panel can be
added between service bays to further control splashing and cross contamination.
(-SFS) Soap Flush System allows cleaning
of soap dispenser and tubing without disassembly.
(-SO) Although these units are standardly
furnished with knee actuation for water dispensation, Sensor Operation
can be specified. By standing in front of the sink, the user interrupts
a continuous beam of light emitted from the electronic eye, thereby activating
the water flow. Once the user steps away from the fixture, the water stops.
(-SS) As an integral part of the backsplash,
a Storage Shelf can be specified for your Scrub-Sink.
(-ZZ) Up/Down Ball Joint with Rosepray
Nozzle
